Film laser marking
Films used in packaging are a very thin material made up of elastomer polymers. Flexible film packaging can be in the form of bags, envelopes, pouches, sachets and wraps. These films can be made of easy to yield materials such as aluminium foil or paper sheeting to provide reflective and flexible qualities. Below, we will explain more about its use and film laser marking.
Advanced production processes result in a durable, thin material, making flexible film packaging a cost saving and waste minimising option. Films are used as barriers to prevent dirt, gases, germs, light or liquids from passing through it, ideal qualities especially in the food industry to preserve product quality.
Due to their varying complex combinations, film laser marking can be achieved with the entire laser range, depending on their components. Laser marking is contactless and therefore does not apply any pressure to the very often delicate film material. Labels can also be applied without contact by blowing them into place.
Solutions for the film sector
Lineal idBlocks 4020/6020
Blow and contact label applicator system
Frontal idBlocks 4030/6030
Label applicator system for different faces of the product
Fan idBlocks 4042
Label applicator system by belts for high speed corners or uneven surfaces
Blow idBlocks 4050
Blow Label applicator system for high speed contactless
idBlocks Pallet 6011
Pallet labelling solution for 2 labels, 1 stop at high speed
idBlocks Pallet 6013 / 6014
Pallet labelling solution for 2 label placement in 2 stops
idBlocks Pallet 6015
Pallet labelling solution for multiple placement of labels.
idBlocks Pallet 6020
Pallet labeller on one side or multiple in turn